Chlorine Granules - 1kg

Our chlorine granules are completely soluble and are used to stabilise your hot tubs pH levels. They contain a stabilising agent to protect your hot tub against the effectiveness of chlorine in the water when exposed to sunlight, making the granules ideal for daily chlorination. Guidance - How much chlorine to add A heaped teaspoon holds approximately 8g of chlorine granules. As a general guide, to increase a 1500L hot tub from 0ppm to 5ppm you will need to add at least 12g of Chlorine Granules. So approximately one and a half teaspoons should be enough. Dosage Heavily used hot tubs, maintained at high temperatures, may require more frequent dosing with Chlorine. Individual requirements may vary, test using a poolside test kit and adjust the dose rate as necessary to maintain a chlorine level of 1-3 ppm or mg/litre. pH Control To keep your hot tub at the optimum pH level, the water should be maintained at a pH level of around 7.4 and between 7.2 and 7.8 at all times. If the hot tub is too alkaline (8.0+) the efficiency of the chlorine is around 20%. If the pH level is too high you could damage your hot tub and swimsuit, it is vital to check the pH level of your hot tub before use using a simple pH testing strip. CHLORINE CONTAINS TROCLOSENE SODIUM, DIHYDRATE These chlorine granules are harmful if swallowed. Causes serious eye irritation. May cause respiratory irritation. Very toxic to aquatic life with long lasting effects. Avoid breathing dust/ fume/ gas/ mist/ vapours/spray. Avoid release to the environment. Wear eye protection/ face protection. IF INHALED: Place the person into the fresh air and keep them comfortable, monitor their breathing. Call A&E or your doctor if you feel unwell. If eye irritation persists, seek medical advice immediately. If chlorine comes into contact with acid, it will give off a toxic gas. Wear safety goggles when mixing chlorine and water to avoid any splashes into the eye area.