TruePave Grids Shed Base Kit

Can also be used for Decks, Cabins, Greenhouses, Driveways, Paths, Car Parking, Hard Standing and many other uses. Please select the shed size from the Options list. If you cannot see the size required you should be able to get close using combinations of sizes. Each grid is 330mm square - just over a foot square, and 40mm thick. If your Shed is 7ft x 5ft, then simply multiply the 2 numbers together and that is how many grids you will need! So for a 7ft x 5ft shed, you would need 35 grids (7 x 5). A 4ft x 3ft kit (12 grids) plus a 6ft x 4ft kit (24 grids) would give you 36 grids. If you prefer to calculate in square metres, 9 grids (3 x 3 arrangement) is 1 square metre approx. Once your kit arrives just level out your site with a spade. Make sure the ground is firm. Clip together the grids as you lay them. Add your own small stones. Done. Ready for the Shed or Greenhouse. This interlocking ground and grass reinforcement product is successfully used in many other applications, including green car parking areas, private lanes, access roads, construction sites, greenhouse soakaway, and as a base for decking and garden sheds. It is tough, flexible and easy to install making it the professional choice for a wide range of projects. UK Manufactured from 100 recycled material diverted from landfill. These Grids are the environmental and sustainable solution of choice (SuDs source control compliant, do not impede water soakaway). Benefits that matter! Our Customers tell us they use TRUEPAVE GRIDS for Construction sites, Green car parking areas, Private lanes and access roads (including emergency access) , Pathways and drives, Greenhouse soakaway base, Base for Shed, Decking and Log Cabin, Golf courses, Landscapes, Equestrian and livestock facilities, Green roof and rooftop gardens, River and road embankments, Private airfields. (Load up to 200 tm).